Raypak Pool Heater MV Output Fault / Flame w/o CFH Error Code

Updated 2026-08-29 · review status: manual-verified Last verified: 2026-08-29

Quick answer

The gas-valve output is wrong or flame is sensed with the valve closed.

Severity: high · DIY difficulty: intermediate

Safety

TBD - must be written per-code before publish

What MV Output Fault / Flame w/o CFH means

The gas-valve output is wrong or flame is sensed with the valve closed.

Code meaning varies by series

  • X94 / SR-410 (Professional Series Digital): MV Output Fault: ignition control has detected a problem with the gas valve output. Flame w/o CFH: ignition control senses flame present with the gas valve closed.

Causes, ranked

  1. Causes not yet documented — verify against the service manual.

Parts & supplies for Raypak Pool Heater: filters, control boards, sensors, and common replacement parts.

HVACDirect →  ·  Amazon →

Commonly searched as: "raypak mv output fault / flame w/o cfh" · "raypak error code mv output fault / flame w/o cfh" · "raypak air conditioner mv output fault / flame w/o cfh"

Sources

  • PoolDial error-code reference (manual-backed) — verified 2026-08-29
  • Raypak Professional Series X94 Installation & Operation Manual (241494), Table N Error Condition Messages — verified 2026-08-29