Carrier Mini Split H00 Error Code

Updated 2026-08-29 · review status: manual-verified · reviewed by MiniSplitDecoder Editorial Team Last verified: 2026-08-29

Check your model first

  • Carrier 45MHHAQ / 45MUAAQ High Wall (Comfort 22)

Match the model on your equipment label to the linked manufacturer documentation. The same code can mean different things across model families.

Quick answer

H00 (displayed by Carrier manuals as EH00) means the indoor control's EEPROM malfunctioned - the indoor board is not reading stored control data correctly Turn the system off, wait about 10 minutes, power cycle once at the breaker, and schedule service if the code returns. Do not open either cabinet..

Severity: high · DIY difficulty: easy

Safety

Stop at the single power-cycle check. Do not open the indoor or outdoor cabinet, test sensors with a meter, or touch wiring - sensor and board diagnosis is technician-only.

What H00 means

H00 (displayed by Carrier manuals as EH00) means the indoor control's EEPROM malfunctioned - the indoor board is not reading stored control data correctly.

Code meaning varies by series

  • Carrier 45MHHAQ / 45MUAAQ High Wall (Comfort 22): EH00 - indoor EEPROM malfunction

Causes, ranked

  1. 1. the indoor board's configuration memory is unreadable or corrupt common pro only

    Check: Requires resistance measurement against the Carrier service-manual sensor table.

    Fix: Technician: test the sensor, replace if open/short or out of spec.

  2. 2. Transient fault that clears after one reset common DIY

    Check: Turn the system off with the remote, wait about 10 minutes, then power cycle once at the breaker or disconnect if you can do that safely.

    Fix: If the code returns, stop resetting and schedule service.

  3. 3. Loose sensor connector or damaged sensor lead occasional pro only

    Check: Connector inspection is inside the unit chassis.

    Fix: Technician: reseat or repair the sensor connector and lead.

  4. 4. Control PCB input fault after the sensor checks out rare pro only

    Check: Board-level voltage checks only.

    Fix: Technician: diagnose the PCB sensor input; replace board if faulty.

Related codes

Cross-references for the same fault family, by brand:

Carrier H03 · Carrier L01 · Carrier EC07

Commonly searched as: "carrier h00" · "carrier error code h00" · "carrier air conditioner h00"

Sources

Related Mini Split guides

Mini-Split Communication Error: DIY Checks · Mini-Split Flashing Light Decoder: Blink Patterns · How to Reset a Mini-Split After a Power Outage