Senville Mini Split Error Codes
Find a code
Featured codes
- EC51 — EC51 means an outdoor unit (ODU) EEPROM parameter error on Senville LETO and AURA ser
- EC52 — EC52 means the outdoor unit's coil temperature sensor (T3) is either shorted, disconn
- EC53 — EC53 means the outdoor ambient temperature sensor (T4) is giving abnormal readings or
- EC54 — EC54 means the compressor discharge temperature sensor signal is out of range on Senv
- EC56 — EC56 means the system cannot trust the T2B sensor - the indoor coil outlet temperatur
- EC07 — EC07 (also displayed as F5 on some Senville units) means outdoor fan speed out of con
Recently updated
Browse by fault family
Model families
Safe checks with an external tool or supply
These pages list the check you can do from outside the unit, with an optional external tool or maintenance supply. None of them repair an internal fault.
- EC51 — EC51 means an outdoor unit (ODU) EEPROM parameter error on Senville LETO and AURA series: the outdoor main PCB…
Related troubleshooting guides
Manufacturer manuals
E codes
- Senville EC07 error code
Senville EC07 means the outdoor fan is spinning outside the speed range the control expects (some units show it as F5). Debris or ice on the blade is … - Senville EC51 error code
EC51 means an outdoor unit (ODU) EEPROM parameter error on Senville LETO and AURA series: the outdoor main PCB is not getting the expected feedback fr… - Senville EC52 error code
Senville EC52 means the outdoor coil temperature sensor (T3) is shorted, disconnected, or reading outside its valid range (signal below 0.06V or above… - Senville EC53 error code
Senville EC53 means the outdoor ambient temperature sensor (T4) is giving abnormal readings or is not responding, so the unit cannot apply outdoor ope… - Senville EC54 error code
EC54 means the compressor discharge temperature sensor signal is out of range on Senville LETO/AURA (Midea platform) systems - the board cannot verify… - Senville EC56 error code
Senville EC56 means the indoor coil outlet temperature sensor (T2B) on multi-zone systems is disconnected, shorted, or reading abnormally (signal belo… - Senville EL01 error code
Senville EL01 (sometimes shown as E1, 8.8, or 88) means the indoor and outdoor units cannot communicate - broken signal wires, EMI, or a failed PCB. P…